[Basic use material]



▶ TanTan Shingle Shingle (ST-33, Transparent), TanTan Shingle Shingle (ST-34, Red-brown),

     TanTan Versatile Waterproofing Agent (ST-35)

▶ Reinforcing fabric - Selective construction on partial or overall

▶ Brush, roller

[Construction Method]  

1. Clean the shingle roof by using a broom.

2. Fix the lifted part with a nail.

3. Waterproofing agent apply

    1) Constructing with waterproofing agent only.

         ▶ New building or clean condition

                ⇒ Apply 2 times(re-apply after drying) with TanTan Versatile waterproofing agent(ST-35).

         ▶ To have a leak and maintain the roof color

                ⇒ Apply 2 times(re-apply after drying) with TanTan Shingle Shingle (ST-33, Transparent)

         ▶ To have a leak and change the color 

                ⇒ Apply 2 times(re-apply after drying, mix the 10% of water) with TanTan Shingle Shingle (ST-34, Red-Brown) 

        ① Work from the top of the roof.

        ② Apply it upwards so that the waterproofing agent fill in the lifted joint of the shingle roof.

     2) Constructing with reinforcing fabric

         ① Spread reinforcing fabric and mix TanTan Shingle Shingle(ST-34, Red-Browon) : Water = 2 : 1 ratio and apply 1st.

         ② From the second row of reinforcing fabric, work with 5cm overlapping.

         ③ Mix 10% of water or use undiluted solution of TanTan Shingle Shingle and apply it 2 or 3 times.(After drying, re-apply)